When you’re trying to determine how fast your network adapter is, it’s essential to know how to check the speed of your network adapter. The best way is by using Windows Device Manager or System Information, but if those aren’t options for you, here are some other ways:
Check Network Adapter Speed via Device Manager
Open Device Manager and
Select Network adapters.
Just right-click the adapter in question and choose “Properties” from the drop-down menu.
Select the Details to tab from the above window, then click on the Speed and Duplex field at the bottom left corner of your PC screen or laptop’s display screen (or tap CTRL+D).
Check Network Adapter Speed via System Information
To check the speed of your network adapter, go to Start Menu and type System Information. Open System Information by typing it in the search bar at the bottom right corner of your screen or by pressing the Windows key + r on your keyboard. Select the Device Manager tab from the top left corner and select the Network Adapters section from the left pane (located under Hardware). You will see all network adapters on this list with their respective speeds next to them under the Speed column for you to compare them against each other.
Check Network Adapter Speed via Command Prompt
Open Command Prompt.
Type “ipconfig” and press Enter. A list of network adapters appears; look for your adapter’s name or description if you have more than one installed on your machine. In Device Manager, if you’re using a Windows version older than Windows 10 (and don’t have Admin privileges). The IP address and subnet mask will vary depending on how many networks are, but they should be somewhere between 192-223 (the default range), with no more than 255 used and 255 reserved for loopback testing purposes only (see below).
At any point above, when Windows requested you to execute with Administrator permissions instead of simply ordinary user account access, you should have typed “ipconfig /all”
It will give us all sorts of information about our physical hardware configuration options, including the type(s) on our machine and their respective speeds (if applicable).
Check Your Network Adapter Speed for a Specific Website
If you want to know if your network adapter is fast enough, you can use the ping command to determine whether or not it’s fast enough to load websites. To do this:
Open Command Prompt (Windows 10) or Terminal (macOS)
Type “ping” and the website name into the command prompt/terminal window
Check Your Physical Ethernet Port Number
If you’re using a wired connection, your router or cable modem may be to a different port than the one you’re using. In this case, check the physical Ethernet port number from the device manager. If you have multiple ethernet ports, find out which is connected to the internet and disable all other connections except for that one.
Determine the Chassis Type of Your Computer
It is a simple way to find out if your computer is an older model or new. You can also try this method if you want to know what kind of motherboards are in specific models of computers, as well as which manufacturers use chipsets. If you need clarification about how things work inside your machine (or don’t have access), you may need help from someone who knows what they’re doing before trying this method yourself!
Determine the Motherboard Manufacturer and Model of Your Computer
If you’re having trouble with your network adapter speed, it could be due to a problem with your motherboard.
Select “System” from the Control Panel menu.
Then click Device Manager under Display Adapters or Network Adapters, depending on what type of adapter you have installed in your system (you may need to expand these sections).
If there is no device listed in Device Manager, then there is no issue with either Hardware or software-related problems;
However, if there is one listed, proceed further down this list until reaching a list containing multiple entries labeled Wireless Device Driver
It will be another section titled Wireless Network Adapter Name, where we can see what kind of wireless card has into our computer system through either USB cable connection method mentioned earlier during installation.
Determine the CPU Model of Your Computer
There are eight different CPU models available on the computer.
The computer has an Intel Core i7-7700HQ processor with eight cores and 16 threads (3.20 GHz). The results will look like this: You can see that your system has an Intel Core i7-7700HQ processor with eight cores and 16 threads (3.20 GHz).
Turn on/off a Wired Network Connection from the Command Line
Use the netsh command.
Use the netsh wlan command.
Use the netsh interface ipv4 command.
Use the netsh int ipv6 command.
Use the netsh int command.
List All Available Wireless Networks from the Command Line
Use the netsh power to list all wireless networks.
Use the netsh WLAN to show the current configuration of your network adapter and its status.
The netsh WLAN show networks command will give you an overview of all available devices on several channels, including both 2.4GHz and 5Ghz frequencies.
Conclusion
You can determine how much bandwidth your network adapter uses in many different ways, regardless of whether or not you are a computer whiz. It will help you determine whether your internet connection is by your ISP and, if so, what to alleviate the issue.
