Hardware
Hi,
I have a Studio 1558 laptop with Windows 7 installed on it and facing some issues with it.
I was facing certain issues with my Optical Disk Drive, which got replaced.
After replacing the optical drive, whenever I am playing any CD’s and DVD’s games or videos, an error message pops up –
Hardware escalation is either disabled or not supported by your video cards which could slow the performance.
To resolve the issue I have to shut down and restart my system and try all over again.
At times my system display goes blank or black, the moment I try playing those games or videos.
- 931 views
- 2 answers
- 20 votes
Hi,
My Toshiba Satellite Laptop is having a problem. It's battery has drained and I can't use it anymore. Are there any Toshiba batteries , for my laptop still available in the market?
My battery is Li-ion BATTERY PACK Model No. PA3465U-1BRS. I really need your help.
Thank you!
- 905 views
- 2 answers
- 1 votes
Hi,
Every time when i start up my computer ,I get a quick flash with an error message. The error message is as follows:
"Catalyst Control Center Monitor not responding"
I am not sure if this is the exact message, since i mentioned earlier that the message quickly flashes. I did some research and found out that this message is related to the ATI graphics card installed on my computer. I just do not know what the relationship is and how i stop this message from popping up at start up. It is quite irritating and i would like to have it resolved as soon as possible. The graphics card on my machine is an ATI Radeon HD 4200 integrated graphics card. Please solve. Thanks!
- 1318 views
- 1 answers
- 20 votes
Hi,
My computer shuts down unexpectedly, while i am in the middle of working. It just power offs.
I turned it back on and after beeping ,it displayed the following message: CPU was shutdown due to a thermal event.
I then have the option to proceed with starting up the computer normally or to enter set-up of the system.
A few times it failed to start back up and the only way i was able to get it back on was to remove the power cable from the power supply and plugging it back in.
I think that my computer is overheating and i tried installing a CPU cooler, but the one that i purchased did not fit.
What exactly do i need to do to prevent my computer from overheating?
- 1013 views
- 2 answers
- 20 votes
Hi,
I have a Toshiba Satellite L305D laptop. When I put my laptop on, it does not go on.
When i press on the power button, the battery light on my laptop blinks 6 times and thereafter nothing happens. The laptop does not go on.
The color of the battery light is orange. I know for a fact that my laptop battery is not good anymore. I have not been using my laptop without it being plugged into power.
Yesterday, I plugged it in but it just did not want to start up. If the battery is no longer good the laptop should at least still work when plugging into a power outlet.
Is the power adapter maybe defect?
Please advice.
- 1875 views
- 2 answers
- 21 votes
Hello all,
The NI-DAQmx Base 3.4 software contains Lab VIEW and C Application Programming Interfaces (API) that allows creating applications for devices. It is provided by national instruments that can be accessed at www.ni.com.
The error "NI-DAQmx Wait for Next Sample Clock is only supported for the hardware-timed single point timing type" example mode are those that obtain or create a continuous hardware timing that doesn't buffer.
- 1729 views
- 1 answers
- 21 votes
Hi,
I have a Visioneer Flatbed scanner that comes with the software application Paper soft.
I got an updated version no. 11 of the same software from the internet. I installed it but that contains a virus or some malicious software. So my antivirus every time deletes some file from the installation folder. I even installed it ,but that was unable to function properly.
Then I decided to go back to the version provided in the scanner cd which is version 9. But every time I try to install it, following error appeared.
Paper Port
Internal Error 2723.NewProductFound
- 2791 views
- 2 answers
- 1 votes
Good day friends,
Real View ICE (RVI) is ARM's legacy target connection unit. I am using one for last couple of months. I am very good at embedded programming but not very much expert on things on installation / up gradation / pc side.
I recently tried to install the update for real view ice ,but that was failed due to the error that I cannot understand.
I searched for the update of my rvi box and found one ,but whenever I run it, it gives me the following error.
RVI Update
It is not possible to install Patch Version 3.2.1 on the current release (3.3.0).
- 1464 views
- 1 answers
- 5 votes
Hi,
I plugged my computer into the power outlet this morning and before i even pressed on the power button to put it on, smoke started to come out of it.
I pulled it out from the power outlet and after a few minutes i tried putting it back in and putting it on, but nothing happened.
The computer is no longer starting up.
I know something is burnt. I know that a component is damaged, which is why the computer is not going on. But I do not know which component is damaged. I also would like to know what caused the component to burn.
Which component it is and if it is replaceable or if i would have to buy a new computer?
Thank you.
- 1622 views
- 2 answers
- 20 votes
Hi,
I do not have any sound coming out from my speakers. I checked that the speakers are correctly connected to my computer and that they are on. However there is no sound. Everything was working just fine yesterday. I took my pc off and when i turned it back on today it just did not have any sound.
I did see that there is a yellow exclamation mark in the Device Manager implying that the drivers are not installed but i do not understand how that can happen. I did download a driver for my sound card but it did not work. I still do not have any sound on my computer and the yellow exclamation mark is still there.
My computer has a Creative X-Fi Titanium card and my computer has Windows 7 Ultimate installed.
Thanks!
- 1102 views
- 3 answers
- 20 votes