Immediately, I want a solution on my printer problem. Canon IP 1980.

Physically cartridge have been installed properly, but the time to print, appears notification error like this:
"The following ink cartridge cannot be recognized Black

Printing cannot be execute because the ink cartridge may not be installed properly or may not compatible with this printer"
I need help all of you because there is an important task should use this printer.

Thanks before

I bought an ink-jet printer with continuous system a month ago. I am printing a lot of paper jobs daily. Early this morning when I start working and printing pages from the book I am making, I cannot print on the printer.

Alternately the lights on the printer are blinking. Ink tanks are all full and there is no bubble found on the ink tubes. What should I do now?

Hi,

I had an HP 6500 printer 6 months ago. It was working great at first and I love it. I went out of town for a month and when I came back, that error messages comes up when I try to do something like photocopy, scan or print from my computer. I don't have an idea why this happened.

All the inks in my printer are pretty good and not expired, about half way full. Tried to power cycle a couple of times but did not make any difference. Any ideas are well appreciated.

Hello,

I know you guys usually just talk about the hardware that is in your case, but I just came across a problem with my Canon Printer. The printer stopped printing Black colors from the cartridge. I did a bunch of nozzle cleanings and even a couple deep cleans.

Still things were not right. Now, I just realized that even though the printer was telling me the ink tank was full it was actually empty. I am not real knowledgeable of printers but I took out the cartridge an looked at it.

Since they are clear I was able to see the ink in them. It appears to be completely out but I am not sure if I am looking in the right spot. There is a front compartment and then there is a bigger compartment that looks like a sponge is in there.

Hi,

I have an EMP-20 programmer.

I was going to upgrade my computer and had a question.

Currently my programmer plugs into the printer port of my computer.

The computer I am wanting to work off of does not have this port.

If I buy an adapter like this

Will that work? Will I need to possibly re-assign my port or something in the programmer's menu?

Let me know what you think.

Thanks!

Hello good day,

 I run a business and have a couple of computers at the office. I have 5 computers on a network, all are running Mac OS X 10.6 and a laptop which runs windows 7 all in the same network. I installed an HP C7280. It prints from my WIndows 7 computer, but it doesn't print from all of my Mac computers. My Mac computers can see the printer, when they try to print it shows on the queue, but it gets stuck.

Recently I bought a WC 7120 and I installed it in every pc on the network and works great, but in every MAC I installed, the driver stops working after a while, and the printer screen displays an error number, error 016-573. I've searched all over the internet and already ask to the seller but nobody knows what this means. I installed the driver from the installer in the cd, the printer has a static IP, and only mac computers got the error. Can you help me?

I recently bought an HP Cartridge for LaserJet printer 3600 series, it’s only four months since then but the ink is almost over with the printer reminding me to replace them, this my first time purchase, I have been using the cartridge it came with and taken about 4 years, I contacted the retailer only to tell me that his hands are tied. Is there a way to identify whether these are refilled cartridges?

Epson LX300 printer Error in printing lines

I am printing a report in table format. My printer is Epson LX300 connected directly in my computer.

The page is printed in landscape mode in a short bond paper. Letters and number and special characters are printed correctly.

The only problem is the borderlines of the table printed like a sine wave.

No straight lines are printer.

How can I solve this?

How can I use the contour cut of my Roland SC-545EX printer?

We have a client wanting to print a pre-cut vinyl sticker.

He said that our printer is just like the printer being used by their previous sticker provider that has been already out for business.

He ordered 100 pre-cut stickers for their Motorcycle Club. We have accepted the job without any knowledge on the job.

I am looking for the process from the manual but I cannot find it.

Please help!