Analog video tape into digital format on a CD?

Asked By reema 70 points N/A Posted on - 10/10/2011

What hardware and procedure is required to convert the contents of an analog video tape into digital format on a CD?

• Status: Open
• Question Views: 932
• Answer Count: 2
• Vote Up 1 Vote Down

• Answer Accepted: Yes
• Question Category: PCs

Best Answer by Lemon

Go To Solution

Best Answer

Best Answer

Answered By Lemon 0 points N/A #89639

Analog video tape into digital format on a CD?

Hi,

Firstly, you will need:

• The Video Cassette you want to copy
• A VCR to play the cassette
• A Blank CD-R to record the captured video
• A computer with a video capture card (like AVerDVD EZMaker Video Capture Card or Pyro 1394DV Digital Video Capture Card, etc) installed. You will also need a CD-R/W drive in your computer to burn the resulting movie file to a CD.
• If you are purchasing a video capture card, they usually come with the necessary software.
• Cables to connect your VCR to the PC. If you are purchasing a card like in 3 above, you should receive the cables with your card.
• Software for converting VCR video to avi or mpeg.

Secondly, to convert the video-cassette you should do the following-

• Install the video capture card in your PC – usually in a PCI slot.
• Connect the VCR output to the card input on your PC.
• Power on your PC and the VCR.
• Start the video capture software on your computer, Pop in the video-cassette into the VCR and follow the instructions as per the software's manual.
• This should convert the video-cassette into a digital movie file on your computer's hard disk.
• Convert video to avi or mpeg
• Next, use the CD burning software which came with your computer to burn this movie onto the CD-R.

Hope this helps you. Good luck!

 

About Lemon

Questions
0

Answers
6

Best Answers
6

• Vote Up 0 Vote Down

• Posted on - 10/10/2011
• Question Category: PCs

Answered By luckyphalia 0 points N/A #89641

Analog video tape into digital format on a CD?

You Will Need:

1.  The Video Cassette you want to copy.

2.  A VCR To play Cassette

3.  A Blank CD-R to record the capture video.

4.  A computer with a video capture card  (like AVER DVD EZMaker  Video Capture Card )Installed. You will need al so a CD-R/W in your computer  to burn the resulting movie file  to a CD.

5.  If you are purchasing a video capture card, they usually  come with necessary  software.

6.  Cables to connect your VCR to the PC. If you are purchasing  a card  like in 3 above, you should receive the cables with your card.

To Convert The Video – Cassette:

1.  Install  the video capture card  in your PC. Usually in PCI slot.

2.  Connect the VCR output to the card input on your PC.

3.  Power on your PC and the VCR.

4. Start the video capture software on your computer, pop in the video cassette into the VCR and follow the instructions as  per the software’s manual.

5. This should convert the video-cassette in to a digital movie  file on your computer’s hard disk.

6. Next, use the CD burning software which came with your computer to burn this movie onto  the CD-R.

About luckyphalia

Questions
0

Answers
20

Best Answers
8

• Vote Up 0 Vote Down

• Posted on - 10/11/2011
• Question Category: PCs